ICU Bed 7 Function Electric

Description:

1. Electro-Mechanical (Motorized) Actuator.
2. Bed Height, Angular motion and functioning of bed is controlled via an Electro-Mechanical (Motorized) type of actuator.
3. 4 section platform top  made of Oval-Perforated X-Ray Translucent material for all sections and X-ray Cassette Holder Beneath Backrest used from one side.
4. Four Pieces Individual Side Rails With Inbuilt Bed Angle Indicator (Outer side as well as Inner side) made of ABS Material.
5. ABS Head and Foot Panels along with lock and corner buffer.
6. Framework made-up of M.S. Tubes.
7. Bed Mounted on 125mm (5”) Diagonal Locking (Lock in Two Castors), Twin Wheel Castors made of Polyester.
8. SS. Telescopic I.V. Rod with 2 Hook’s and Provision at 4 Locations.
9. Ti-Motion Powered Motor of 0.5hp.
10. Bed height adjustment range : 450 mm or less and 900 mm.
11. IP54 Liquid splash protection and facility of Resettable over current breaker fitted for protection.
12. Electric Shock Protection of class 1 (type-B) Medical Devices as per IEC.
13. Safe Working load of 200kg and Therapeutic Weight limit for mattress and patient load bearing capacity of 175kg.
14. Positions Obtained/Function’s: Backrest, Knee-rest, Trendelenburg, Reverse Trendelenburg, Hi-Low, One Touch Cardiac Chair Position, One Touch Electric CPR.
15. Finish: Pre-treated & Epoxy Powder Coated
16. Power Supply: Single phase 230 Volt, 50 Hz (AC Supply) fitted with Indian plug of suitable rating.

 Dimensions:

1. Overall Size: 2160L x 1050W x 450 – 900H mm.
2. Angle of Back Section: 70°
3. Angle of Knee Section: 30°
4. Angle of Trendelenburg / Reverse Trendelenburg: 12° / 12°.
5. Clearance between bed base frame and floor surface: 150mm

Accessories:

1. 4 Section X-ray radio translucent PU Foam Mattress made of cube cut design & independent cubes promote air flow to reduce moisture with a density of 40 Kg/m3 and 4″ thick. Also provided with Rexene cover which is flame retardant, anti-microbial and water proof.
2. Single Urine Bag Holder
3. Single Chart/Filer Holder made of plastic material.
4. Hand Sanitizer Holder.
5. Mild Steel powder coated Oxygen cage cylinder.

Quality Standard Certification:

1. All the certificates as “General Requirement for all items” under “Product & Manufacturer Quality Standards”.
2. PU foam complying to IS 7933 standard from “NABL” accredited laboratory.
3. Comply with IEC 60601-2-52: Particular requirement for basic safety& essential performance of medical beds.