Hospital Furniture

Description: 

1. Foot operated Hydraulic System mechanism by stepping on the pedal located on both sides of stretcher for Hi – Low, Trendelenburg & Reverse Trendelenburg adjustments. 
2. Smooth Pneumatic mechanism to raise Backrest.
3. Kneerest position Obtained by Smooth Crank System with S.S. Foldable Handle at foot end. 
4. Four section X-Ray permeable Platform Top along with Suitable Mattress of 100 mm (4”).
5. Two Pieces Individual Detachable Collapsible Safety Side-Rails with safety lock, Stainless Steel Pipe
6. Provided with Push/Driving Handle on the head end for smoothing the way of movement conveniently and can be stored while not in use. 
7. Tubular M.S. Framework mounted on 200 mm (8”) Central Locking Castors 
8. Bottom Cover with Storage bin. 
9. Corner buffer provided at 4 locations. 
10. Urine bag holder provided at both sides.
11. S.S. Telescopic I.V. Rod with 4 Hook’s (USI-5002) & provision on all 4 sides 

Dimensions (Approx.) : 

1. Overall Size: 2040L x 810W x 600 – 920H mm
2. Stretcher Top Size: 1930L x 735W 
3. Angle of Back Section: 90°
4. Angle of Leg Section: 25°
5.  Angle of Trendelenburg / Reverse Trendelenburg: 12°/ 10°

Optional Accessories:  

1. Fifth Wheel 
2. Oxygen Cylinder Holder 
3. Foot end Shelf 

Description: 

1. Tubular M.S. Framework, foot operated hydraulic pump for height adjustment
2. Smooth Pneumatic mechanism to obtain Trendelenburg and Reverse Trendelenburg positions. 
3. Removable two section X-Ray permeable top with Head Raise on Ratchet Mechanism. 
4. Trolley Mounted on 125 mm (5”) diagonal locking castors
5. Provided with Oxygen Cylinder Cage, Sliding X-ray Cassette holder, SS drop down safety side railings, SS telescopic I.V. Rod with 4 hooks, Utility Tray and Suitable Mattress of 50 mm (2”).
6. Finish: Pretreated and Epoxy powder coated.

Dimensions (Approx.): 

1. Overall Size: 2100L x 670W x 690 – 950H mm.
2. Stretcher top Size: 1940L x 605W mm
3. Angle of Back Section: 70°
4. Angle of Trendelenburg / Reverse Trendelenburg: 9°/ 15°

Description: 

1. Smooth Pneumatic mechanism to raise Backrest. 
2. Hi – Low position obtained by Smooth Crank System with S.S. Foldable Handle at foot end. 
3. Framework made of mild steel mounted on 125mm (5”) Central Locking Castors
4. Two Section PP Platform Top. 
5. PE engineering plastic moulded two Pieces individual Side Rails.  
6. Bottom Trolley fully M.S. covered 
7. Finish: Pretreated & Epoxy Powder Coated. 
8. Overall Size: 1920L x 680W x 530 – 820H mm.

Description: 

1. Advance Liner actuator system with IP54 Liquid splash protection (03 pcs. Motor, 01 pcs. Control box, 01 pcs. Handset]
2. PP Head Panels with metal inserts along with lock and corner buffer.
3. PP Moulded Two Pieces individual Side Rails.
4. Tubular framework mounted on 125mm (5”) Central locking castors.
5. Three-section top made of Bakelite sheet covered with 3 section Removable suitable Mattress. 
6. Positions Obtained/Function’s by Patient Hand Remote: Backrest, Hi – Low, Trendelenburg & Reverse Trendelenburg.
7. Leg end section can slide under the main section.  
8. Height adjustable a pair of foam padded knee crutches.
9. S.S Telescopic I.V. Rod with 4 hooks 
10. Detachable S.S. Tray 
11. Provided with adjustable S.S. Grip Handles on both sides.
12. Finish: Pretreated and epoxy powder coated.

Dimensions (Approx.): 

• Overall Size: 2000L x 950W mm 
• Platform Size (full extended): 1900L x 660W
• Platform Size (Leg section Slide under):1360L x 660W
• Minimum Height (without Mattress): 680mm
• Maximum Height (without Mattress): 960mm
• Backrest angle: 60°
•  TB / RTB: 9° / 12° 

Description:

1. Foot operated Hydraulic System mechanism by stepping on the pedal located on either side of the table for Hi – Low adjustment.
2. Backrest, Trendelenburg & Reverse Trendelenburg position Obtained by Smooth Crank System with S.S. Foldable Handle behind head end. 
3. Heavy PP Head Panel with metal inserts along with lock and corner buffer.
4. PP Moulded two Pieces individual Side Rails.
5. Tubular framework mounted on 125mm (5”) Central locking castors.
6. Three-section top made of Bakelite sheet covered with Removable suitable Mattress.
7. Leg end section can slide under the main section.  
8. Height adjustable a pair of foam padded knee crutches.
9. S.S Telescopic I.V. Rod with 4 hooks 
10. Detachable S.S. Tray 
11. Provided with adjustable S.S. Grip Handles on both sides.
12. Finish: Pretreated and epoxy powder coated. 

Dimensions (Approx.):  

•     Overall Size: 2090L x 1000W mm
•     Platform Size (full extended): 1900L x 660W
•     Platform Size (Leg section Slide under): 360L x 660W
•     Minimum Height (without Mattress): 620mm
•     Maximum Height (without Mattress): 870mm
•     Backrest angle: 75°

Description:

1. Rectangular & square tube frame work mounted on PVC stumps
2. Three sections fixed cushioned top 
3. Backrest, Seat & Leg section adjustable by hand lever 
4. Provided with SS bowls 
5. Height adjustable a pair of knee crutches.
6. Knockdown construction.
7. Finish: Pre treated & Epoxy Powder Coated.
8. Overall Size (Approx.): 1800L x 555W x 760H mm

Description:

1. Bed, Labour & Delivery made in 2 section, body section with legs mounted on PVC stumps/shoes.
2. Leg section mounted on 100mm (4”) Castors with brakes. 
3. Leg section can be completely recessed under the body section supports for legs holders with solid mechanism to fix leg holders at required height & width
4. Filled mattress – pad and cover mattress pad in 2 section.
5. Supplied with 2 knee crutches adjustable in height & width 
6. Knockdown construction.
7. Finish: Pretreated & Epoxy powder coated. 

1. Overall Size (Approx.):

•    (a) Body section : 1000L x 800W x 750H mm
•    (b) Leg section : 900L mm.  

Description:

1. Approx Overall size of the locker: 400 (W) X 400 (D) X 800 (H) mm.
2. 01 Shutter at the bottom of the locker.
3. 02 Nos., of shelves (01 Open Shelf).
4. Stainless Steel (SS) top try of 20 Gauge with raised borders on 3 sides forming the upper surface.
5. The body is made of 20G MS CRCA sheet.
6. All MS parts are Pre-treated and epoxy powder coated.
7. 1.2 mm thick Frame tube of MS material.
8. 04 Nos. of castor provided
9. 50 mm Dia. castor provided.
10. Bumper at the back is provided.
11. Slides fitted with Telescopic Channel.
12. Stainless Steel (SS) material of Enclosure of bedside locker.
13. Mild Steel (MS) material of cabinet and Drawe.
14. Locking system for cabinet and drawer is provided.
15. Power Coated finish.
16. Mild Steel (MS) Frame tube material
17. Rectangular frame tube section.

Description: 

1. M.S. Tubular framework made of 19mm x 18G in Four section.
2. Legs made of 25mm x 18G mounted on 50mm castors with hooks and spring wire along with curtains.
3. Each span 810mm wide.
4. Finish: Pre-treated and Epoxy Powder Coated
5. Overall Size: 1680H x 2450L mm

Description:

1. Manually adjustable Pelvic tilt ensures a good angle for examine the pelvic examination
2. Electrically Height adjustment facility allows the doctor to treat the patient more efficiently. Low height allows easy access especially for pregnant ladies. 
3. Electrically Operated Backrest helps in better sitting comfort and examination. 
4. Integrated paper roll holder helps in maintaining better hygiene. 
5. Provided with a pair of hand grips, a pair of Lithotomy crutches & S.S. Tray 
6. Foldable leg section to be used in various positions. 

Dimensions (Approx.): 

1. Overall Size: 1700L x 825W mm. 
2. Platform Dimensions: 1700L x 685W mm
3. Minimum Height (with Mattress): 533 mm
4. Maximum Height (with Mattress): 914 mm
5. Backrest angle:  60°
6. Safe working Load: 135 Kgs
7. Upholstery Thickness: 2.5”

Description:

1. Gas spring assisted backrest. 
2. Electrically Height adjustment by handset facility allows the doctor to treat the patient more efficiently. Low height allows easy access especially for older/pregnant ladies. 
3. Dual side operated utility storage space.
4. Integrated paper roll holder helps in maintaining better hygiene.
5. 2 section top with fixed mattress

Dimensions (Approx.): 

1. Overall Size: 1800L x 600W mm. 
2. Dimensions (Head): 560L x 600W mm
3. Minimum Height (with Mattress): 508mm
4. Maximum Height (with Mattress): 889mm
5. Backrest angle:  60°
6. Safe working Load: 170 Kgs
7. Upholstery Thickness: 2.5”

Description:

1. Fixed upholstered top in two sections.
2. Framework made of MS CRC tubes mounted on PVC stumps/shoes.
3. Back rest adjustable by hand lever
4. Provided with Perineal Cut & pair of lithotomy poles (12mm SS Rod) with straps at foot end of the table. 
5. Knockdown construction
6. Finish: Pre-treated & epoxy powder coated   
7. Overall Approx. Size: 1830L x 600W x 760H mm

Description

• Two Section Table Top
• Fixed section Frame Length : 1300 mm
• Four Legs of the Table with PVC covers, one of the leg is adjustable.
• Backrest adjustable via Gear ratchet.
• Pre-treated and Powder coated tubular Mild Steel.
• Plastic cover which is flexible highly tear resistant, anti-static, flame retardant, disinfectant- and liquid proof, washable.
• Extension: 1800L x 550W x 750H mm.
• Weight Bearing Capacity 150 kgs.
• Mattress made of high density polyurethane foam and density of 30Kg/m³ and 50mm thick.
• Operating Temperature: +10ᵒC to +32ᵒC and Relative Humidity: <85%

Description:

1. Advance Liner actuator system with IP54 Liquid splash protection (02 pcs. Motor, 01 pcs. Control box, 01 pcs. Handset]
2. PP Head and Foot Panels along with lock and corner buffer.
3. PP Moulded Four Pieces individual Side Rails With Inbuilt Bed Angle Indicator (Outer side as well as Inner side).
4. Framework made-up of M.S. Tubes.
5. 4 Section Platform Top made-up of Oval Perforated CRCA M.S. Sheet.
6. Bed Mounted on 100mm (4”) Diagonal Locking Castors.
7. Provision for IV Rod at 4 Locations.
8. Urine Bag Holder on Both Sides.
9. Calf Elevation Manually Operated.
10. Positions Electrically Obtained/Function’s by Patient Hand Remote: Backrest, Kneerest.
11. Finish: Pre-treated & Epoxy Powder Coated.

Dimensions (Approx.):

• Overall Size: 2200L x 1020W x 600H mm.
• Angle of Back Section: 75°
• Angle of Knee Section: 40°

Optional Accessories: 

• 4 Section Mattress (USI – 5001C)
• S.S Telescopic I.V. Rod with 4 Hook’s (USI-5002)

Description:

1. PP Head and Foot Panels along with lock and corner buffer.
2. PP Moulded Four Pieces individual Side Rails With Inbuilt Bed Angle Indicator (Outer side as well as Inner side).
3. Framework made-up of M.S. Tubes.
4. 4 Section Platform Top made-up of Oval Perforated CRCA M.S. Sheet.
5. Bed Mounted on 100mm (4”) Diagonal Locking Castors.
6. Provision for IV Rod at 4 Locations.
7. Urine Bag Holder on Both Sides.
8. Calf Elevation Manually Operated.
9. Positions Obtained by Separate Smooth Crank System with S.S. Foldable Handle: Backrest, Kneerest.
10. Finish: Pre-treated & Epoxy Powder Coated.

Dimensions (Approx.):

• Overall Size: 2200L x 1020W x 600H mm.
• Angle of Back Section: 80°
• Angle of Knee Section: 40°
• Safe working Load : 185 kgs
• Patient weight Bearing capacity : 150 kgs

Optional Accessories:  

• 4 Section Mattress (USI – 5001C)
• S. Telescopic I.V. Rod with 4 Hook’s (USI-5002)

Description:

1. Advance Liner actuator system with IP54 Liquid splash protection (04 pcs. Motor, 01 pcs. Control box, 01 pcs. Handset, 01 pcs. Attendant Control Panel (ACP), 01 pcs. Battery]
2. PP Head and Foot Panels along with lock and corner buffer.
3. PP Moulded Four Pieces Individual Side Rails With Inbuilt Bed Angle Indicator (Outer side as well as Inner side).
4. Framework made-up of M.S. Tubes.
5. 4 Section Platform Top made-up of Oval Perforated CRCA M.S. Sheet.
6. Bed Mounted on 125mm (5”) Central Locking Twin Wheel Castors along with Directional Lock.
7. Dust Protective ABS Cover for wheels.
8. S. Telescopic I.V. Rod with 4 Hook’s and Provision at 4 Locations.
9. Urine Bag Holder on Both Sides.
10. One Touch button for Chair Position, Emergency Head Down, Auto CPR (For Zero Position).
11. Dual Side Manually Operated CPR (For Backrest).
12. Calf Elevation Manually Operated.
13. Battery Backup.
14. Positions Obtained/Function’s by Patient Hand Remote: Backrest, Knee Rest, Trendelenburg & Reverse Trendelenburg, Hi – Low, Electric CPR, LED Night Lamp.
15. Positions Obtained/Function’s on Attendant Control Panel (ACP): Backrest, Kneerest, Trendelenburg & Reverse Trendelenburg, Hi-Low, Auto-Contour, Electric CPR, LED Night Lamp, Locking of Individual Position’s and Battery Indicator.
16. Finish: Pre-treated & Epoxy Powder Coated.

 Dimensions (Approx.):

• Overall Size: 2240L x 1020W x 430 – 720H mm.
• Angle of Back Section: 70°
• Angle of Knee Section: 40°
• Angle of Trendelenburg / Reverse Trendelenburg: 12° / 12°

Optional Accessories: 

• 4 Section Mattress (USI – 5001C)
• Single Section Premium Quality Pressure Ease Mattresses (USI-5001D)
• X-ray Translucent Top for Backrest with X-ray Cassette Holder Beneath Backrest (USI-5008).
• Removable ABS 4 Section Platform Tops.
• Linen Holder at Foot End.
• Bed Extension.
• Oxygen Cylinder Holder
• Embedded Controls on Side Railings

Quality Standard Certification:

1. All the certificates as “General Requirement for all items” under “Product & Manufacturer Quality Standards”.
2. PU foam complying to IS 7933 standard from “NABL” accredited laboratory.
3. Comply with IEC 60601-2-52: Particular requirement for basic safety& essential performance of medical beds.

Description:

1. Electro-Mechanical (Motorized) Actuator.
2. Bed Height, Angular motion and functioning of bed is controlled via an Electro-Mechanical (Motorized) type of actuator.
3. 4 section platform top  made of Oval-Perforated X-Ray Translucent material for all sections and X-ray Cassette Holder Beneath Backrest used from one side.
4. Four Pieces Individual Side Rails With Inbuilt Bed Angle Indicator (Outer side as well as Inner side) made of ABS Material.
5. ABS Head and Foot Panels along with lock and corner buffer.
6. Framework made-up of M.S. Tubes.
7. Bed Mounted on 125mm (5”) Diagonal Locking (Lock in Two Castors), Twin Wheel Castors made of Polyester.
8. SS. Telescopic I.V. Rod with 2 Hook’s and Provision at 4 Locations.
9. Ti-Motion Powered Motor of 0.5hp.
10. Bed height adjustment range : 450 mm or less and 900 mm.
11. IP54 Liquid splash protection and facility of Resettable over current breaker fitted for protection.
12. Electric Shock Protection of class 1 (type-B) Medical Devices as per IEC.
13. Safe Working load of 200kg and Therapeutic Weight limit for mattress and patient load bearing capacity of 175kg.
14. Positions Obtained/Function’s: Backrest, Knee-rest, Trendelenburg, Reverse Trendelenburg, Hi-Low, One Touch Cardiac Chair Position, One Touch Electric CPR.
15. Finish: Pre-treated & Epoxy Powder Coated
16. Power Supply: Single phase 230 Volt, 50 Hz (AC Supply) fitted with Indian plug of suitable rating.

 Dimensions:

1. Overall Size: 2160L x 1050W x 450 – 900H mm.
2. Angle of Back Section: 70°
3. Angle of Knee Section: 30°
4. Angle of Trendelenburg / Reverse Trendelenburg: 12° / 12°.
5. Clearance between bed base frame and floor surface: 150mm

Accessories:

1. 4 Section X-ray radio translucent PU Foam Mattress made of cube cut design & independent cubes promote air flow to reduce moisture with a density of 40 Kg/m3 and 4″ thick. Also provided with Rexene cover which is flame retardant, anti-microbial and water proof.
2. Single Urine Bag Holder
3. Single Chart/Filer Holder made of plastic material.
4. Hand Sanitizer Holder.
5. Mild Steel powder coated Oxygen cage cylinder.

Quality Standard Certification:

1. All the certificates as “General Requirement for all items” under “Product & Manufacturer Quality Standards”.
2. PU foam complying to IS 7933 standard from “NABL” accredited laboratory.
3. Comply with IEC 60601-2-52: Particular requirement for basic safety& essential performance of medical beds.

Description:

1. Overall Approx size : 680 mm L x 450 mm W x 900 mm H.
2. Stainless steel tubular frame work made of 25 mm OD x 18G verticals mounted on 125 mm dia on rusting castor two with brakes.
3. Castor housing and wheels are made from high grade non floor staining synthetic materials with integrated thread guards wheel centre having precision ball bearing to run smoothly.
4. Two stainless steel shelves of 20G thickness, with protective railing on three sides.
5. The railing are made from dia. 10mm S.S. rod with 304 grade stainless steel.
6. Used for trolley frame work and SS shelves. SS parts finished with Matt Polish.
7. Load bearing capacity of 20 kgs.

Description: 

1. Approx Overall size: 965 mm L x 530 mm W x 630 mm to 1090 mm H.
2. Height adjustment by Pneumatic Gas Spring mechanism.
3. Made of Rectangular frame tube material.
4. The edge of the top is raised up to avoid falling of items from edge of table top.
5. 50 mm dia. high quality castor wheels with wheel locks.
6. Pre treated & powder coated finish.
7. All corners are rounded off so that there shall be no sharp edges.
8. Stainless steel sheets/tubes are of Grade 304.
9. Free upward movement to prevent body entrapment.

Description:

1. 02 Nos. of hooks on rod are provided.
2. 50 mm dia. non rusting Castor wheels.
3. 04 Nos. of castor wheels.
4. 02 Nos. of castor with brake.
5. Tubular pipe frame.
6. Height adjustable of the rod with top knob : 1350-2450 mm
7. 10 mm dia. SS rod.
8. Stainless Steel (SS) Grade 304 Material of frame.
9. Stainless Steel (SS) Grade 304 Material of rod.
10. Stainless Steel (SS) Grade 304 Material of base frame.
11. Overall weight of saline stand : 7 kg.

Quality Standard Certification:

All the certificates as “General Requirement for all items” under “Product & Manufacturer Quality Standards”.

Description:

1. Type of bed: Semi Fowler.
2. 02 Section platform of the bed.
3. Availability of back rest section.
4. Leg section linkage welded with MS CRCA tube (16 G).
5. Backrest section linkage welded with MS CRCA tube (14 G).
6. Manual adjustments- Backrest through two screw systems with thrust bearings individually maneuvered by handle for semi fowler bed.
7. Back rest-min 45 % of the frame length.
8. The bed has head & foot panels detachable by hand without need of any tool.
9. Screw mechanism welded with ERW MS tube (18 G) in M.S. cover made from (16 G) ERW tube.
10. Material of handle: MS.
11. Provision of castors- H’ Type Legs with 600 mm Height with 125 mm(5″) dia High Grade Synthetic Body Castors, two with brake, two w/o brake.
12. Number of hooks in Telescopic I V Pole: 2 nos.
13.  For Semi Fowler bed number of sections in mattress: 2 nos.
14. Provision of collapsible Railing.
15. Finishing & workmanship of high standard.
16. All corners are rounded off so that there shall be no sharp corners and holes should be burr free.
17. Saline rod provision: Four locations on the bed platform to hold stainless steel Telescopic Saline rod 12 mm dia. with 15.87 mm dia. x 1.2 mm (18 G) stainless steel.
18. Provision for mounting of syringe pump outer covering tube with a knob to mount syringe pump
19. Size of Buffer: 100 mm.
20. Mattress Platform Surface thickness : 1.2 mm.
21. Raised backrest angle: 65 degree.
22. Dimensions for Fitting of frame ERW tubes diameter 31.75 mm x 1.2 mm (18 G) thick and diameter 22.22 mm x 1.2 mm (18 G) thick and MS sheet having thickness 3.0 mm (11 G).
23. Diameter of Four corner rubber buffers : 75 mm.
24. Diameter of MS tubular : 31 mm.
25. Material of head and foot panels : MS tubular.
26. Colour of mattress cover : Blue.
27. Bed frame tube size : 60 mm x 30 mm x 1.6 mm (16G).
28. Material of collapsing railing : MS.
29. Types of collapsing railing : Manual.
30. Patient Working Load : 135 kgs.
31. Pre treated & Epoxy powder coated.
32. Supplied with SS 304 grade IV rod along with the bed

Dimensions:

1. Overall Length of bed : 2100 mm.
2. Overall width of bed : 950 mm.
3. Bed Platform frame size : 2070 mm L x 910 mm W.
4. Mattress Platform size : 1970 mm L x 790 mm W.
5. Overall length of Back Rest : 920 mm.
6. Overall width of Back Rest : 910 mm.

Accessories & Mattress:

1. Collapsible side rails
2. MS Powder coated urine Bag Holder – 1 no.
3. Saline Stand- 1 no.
4. Chart holder MS made/ moulded.
5. Two section mattresses with cover made of PVC material, waterproof, fire-retardant, breathable fabric separated by zip on three sides with lower cover part made of Rexene.
6. Thickness of PU foam of mattress : 4 inch.
7. Density of PU foam of mattress : 40

Quality Standard Certification:

1. All the certificates as “General Requirement for all items” under “Product & Manufacturer Quality Standards”.
2. Certificates, PU foam complying to IS 7933 standard from  NABL accredited laboratory.