ICU Bed Electric (5 Funct.)
Description:
- Electro-Mechanical (Motorized) Actuator.
- Bed Height, Angular motion and functioning of bed is controlled via an Electro-Mechanical (Motorized) type of actuator.
- 4 section platform top. Backrest section made of X-Ray Translucent material and remaining three sections made of Oval-Perforated ABS Material. X-ray Cassette Holder Beneath Backrest used from one side.
- Four Pieces Individual Side Rails With Inbuilt Bed Angle Indicator (Outer side as well as Inner side) made of ABS Material.
- ABS Head and Foot Panels along with lock and corner buffer.
- Framework made-up of M.S. Tubes.
- Bed Mounted on 125mm (5”) Diagonal Locking (Lock in Two Castors), Twin Wheel Castors made of Polyester.
- SS. Telescopic I.V. Rod with 2 Hook’s and Provision at 4 Locations.
- Ti-Motion Powered Motor of 0.5hp.
- Bed height adjustment range : 450 mm or less and 700 mm.
- IP54 Liquid splash protection and facility of Resettable over current breaker fitted for protection.
- Electric Shock Protection of class 1 (type-B) Medical Devices as per IEC.
- Safe Working load of 200kg and Therapeutic Weight limit for mattress and patient load bearing capacity of 175kg.
- Positions Obtained/Function’s: Backrest, Knee-rest, Trendelenburg, Reverse Trendelenburg, Hi-Low, One Touch Cardiac Chair Position, One Touch Electric CPR.
- Finish: Pre-treated & Epoxy Powder Coated
- Power Supply: Single phase 230 Volt, 50 Hz (AC Supply) fitted with Indian plug of suitable rating.
Dimensions:
- Overall Size: 2160L x 1050W x 450 – 700H mm.
- Angle of Back Section: 70°
- Angle of Knee Section: 30°
- Angle of Trendelenburg / Reverse Trendelenburg: 12° / 12°.
- Clearance between bed base frame and floor surface: 150mm
Accessories:
- 4 Section X-ray radio translucent PU Foam Mattress made of cube cut design & independent cubes promote air flow to reduce moisture with a density of 40 Kg/m3 and 4″ thick. Also provided with Rexene cover which is flame retardant, anti-microbial and water proof.
- Single Urine Bag Holder
- Single Chart/Filer Holder made of plastic material.
- Hand Sanitizer Holder.
- Mild Steel powder coated Oxygen cage cylinder.
Quality Standard Certification:
- All the certificates as “General Requirement for all items” under “Product & Manufacturer Quality Standards”.
- PU foam complying to IS 7933 standard from “NABL” accredited laboratory.
- Comply with IEC 60601-2-52: Particular requirement for basic safety& essential performance of medical beds.